Industry News

Industry News

Equipment of industrial off-gas treatment jams reason check

2026.01.13

Table of Contents

    As swift and violent development of industry, discharged waste gas is increasing also. To protect an environment, off-gas treatment equipment is indispensable. But a lot ofIndustrial off-gas treatmentThe phenomenon that jam can appear after equipment uses period of time, after using period of time like computer, still can get stuck, what does the cause that that causes equipment of industrial off-gas treatment to jam have? Small today make up will analyse for everybody:


    Equipment of industrial off-gas treatment

      Condensation of equipment of industrial off-gas treatment answers knock off art

    (The index of system of 1) to decoke is controlled.

    (Heat in fluid photograph when 2) air temperature is low.

    (Inside equipment of 3) industry off-gas treatment the choice is incorrect.

    (4) did not choose right desulphurization dose.

    (Effect of second birth of fluid of 5) to decoke is poor, the sulfur content in deficient fluid is high. Off-gas treatment second birth is bad, absorb the NaHS that H2S gets in the Na2CO3 inside the tower namely, was not oxidized to be sulfur simple substance entirely, be collected by floatation bubble chamfer, and was taken equipment of industrial off-gas treatment, just finish oxidation reaction in tower upside, generate simple substance sulfur, immediately adheres to at filling surface, this is the main reason that causes upside of equipment of industrial off-gas treatment to block a tower up.

    (The quality that 6) sulfur reclaims: The stand or fall that sulfur reclaims, can direct report is taken off besides how many H2S. What system of even if to decoke leaves is again good, sulfureous reclaim not to come out, that affirmation is to stop was in inside the tower, bury next hidden trouble to block a tower up. If answer a system,still be frit sulfur return fluid, it is to cause the main factor with deputy salt high content.

    (Of the workshop section before 7) remove dust the effect: Well-known, the aeriform part that enters desulphurization system is complex, contain many impurity and dirty substance, once enter equipment of industrial off-gas treatment to go out with respect to very difficult area, meeting and sulfur cream mingle together wet desulphurization blocks a tower up case study and countermeasure cause a tower.


    Equipment of industrial off-gas treatment

    The filling tower of equipment of general industry off-gas treatment is divided it is 3 paragraphs, if detect, is lowermost layer filling pressing difference is big, because remove dust,that most is the effect not beautiful be caused by. We group of doctor of university of science and technology of Jiangsu of combination of 1000 friendly environmental protection is common equipment of off-gas treatment of Voc of research and development already time of one’s remaining years of know exactly about sth, RCO of equipment of desorption of adsorption of equipment of the equipment of catalysis of bright of off-gas treatment equipment that we produce, plasma of box of activated carbon adsorption, low temperature, activated carbon, catalytic combustion, application is in spray paint, presswork, the industry such as medicine, pesticide, chemical industry.