Industry News

Industry News

The design parameter of room of general spray paint asks

2026.01.13

Table of Contents

    Update time: 2020-10-20 09:41:30 authors: Origin of grand rich environmental protection: Http://www.zjhobo.com/vipjz11/vip_doc/18683623.html


      1, illume:

    Bright brightness needs to achieve inside spray paint room 800, 1000 lux, and need uses the light that approachs D65 illuminant, at the same time the wall inside the room should be dumb smooth white. The area that should use stationary to lamps and lanterns makes light source and use lamps and lanterns of clapboard general furnish when using the clapboard illume that waits for transparent material through glass and electrostatic paint division are separated, its install aperture to should take reliable sealed step, the material of clapboard is flame retardant with not easy damaged and the intensity of illumination that the deposit ply on clapboard must not affect a provision.

    2, air flow:

    Usually to doing room of type spray paint, fan pressure head is desirable 0.7-1.0KPa, to wet spray paint room, fan pressure head is desirable 1.26-1.5KPa, the belt of working area carries wind speed to take 0.3-0.5m/s commonly.


    The design parameter of room of general spray paint asks

    3, filter the effect:

    Filter remove dust the effect achieves 98% above. The top cotton that repairs a factory to use commonly has EU5 and EU6 two model, sunlamp illuminate upside can be used inside the room when room of use spray paint, normally extremely tiny speck should be less than every square metre 5.

    4, room body:

    Spray paint room must be sealed, and be in in juncture not due Qi Chen’s accumulation; House system is used child the mother inserts wallboard of model of gush of type heat preservation, it is sealed, good to defend lukewarm performance of spray paint room, aluminium alloy wraps side entrance door, contain in the center of the door viewport, can observe the trends inside the room at any time; House system flank contains working door, pass in and out of convenient staff member.

    5, warm up speed:

    The time that spray paint room rises to be used to 60 ℃ place from 20 ℃ is L0 about, L5min, the thermometer that should notice room of some spray paint at the same time forbids, when measuring temperature, want with the spray inside spray paint room temperature is accurate.

    6, noise:

    Noise is not more than 75dB.