Industry News

Industry News

What demand does spray paint room have? See these you knew!

2026.01.13

Table of Contents

    Update time: 2020-11-05 14:59:46 authors: Origin of grand rich environmental protection: Http://www.zjhobo.com/vipjz11/vip_doc/18828878.html


     1, illume: Inside spray paint room bright 2113 brightness need to achieve 800, 52611000 lux, and need uses the light that approachs D65 illuminant, at the same time the 4102 wall inside the room should are dumb 1653 smooth white.

    2, air flow: Normally the circumstance falls to doing room of type spray paint, fan pressure head is desirable 0.7-1.0KPa, to wet spray paint room, fan pressure head is desirable 1.26-1.5KPa, the belt of working area carries wind speed to take 0.3-0.5m/s commonly.

    3, filter the effect: Filter remove dust the effect achieves 98% above.

    4, room body: Spray paint room must be sealed, and be in in juncture not due system of accumulative; house is used child the mother inserts wallboard of model of gush of type heat preservation, it is sealed, good to defend lukewarm performance of spray paint room.

    5, warm up speed: The time that spray paint room rises to be used to 60 ℃ place from 20 ℃ is L0 about, L5min, the thermometer that should notice room of some spray paint at the same time forbids, when measuring temperature, want with the spray inside spray paint room temperature is accurate.

    6, noise: Noise is not more than 75dB.


    What demand does spray paint room have? See these you knew!

    Operating rules notices spray paint room:

    1, before the job start fan in time to discharge wind.

    2, must wear when the operation prevent poisonous guaze mask or ventilated mask.

    3, altitude exercise should plunge into good safety belt, prevent to slip drop.

    4, allocate contain plumbic pink or dissolvent to volatilize when the painting with larger chroma, should wear respirator. When handling the chemical preparation such as the vitriolic, hydrochloric acid, agent that take off lacquer, should wear defend take.

    5, when processing spray gun jams, after unobstructed of the needle that use steel, should right 45 ° horn tries gush, must not be opposite person, right oneself and wiring (wait like switch electrical outlet) prevent high-pressured gas blowout to go out cause harm.

    6, air compresses confidential somebody to be in charge of only, operating rules of pneumatics machine safety should be abided by when switching on the mobile phone, often check, cheer, forbid to exceed pressure use. The job ends, answer to give off the more than gas inside gas tank, disconnect power source.