Woodworking & Furniture Production Pollution Control Solution

1. Main Pollution Sources

• Wood Dust: Generated during cutting, sanding, and other woodworking processes.
• Paint Exhaust: Volatile Organic Compounds (VOCs) emitted during painting/spraying operations.

2. Proposed Solution Package

To address the pollution issues effectively, the following systems are recommended:

A. Dust Control Solutions

1. Cyclone Filter Integrated System
   • Combines cyclone pre-separation and cartridge filtration for high-efficiency dust removal.
   • Suitable for medium-to-large wood dust particles.
2. Centralized Dust Collection System (Woodworking-Specific)
   • A network of ducts and high-power fans to capture dust at multiple workstations.
   • Equipped with HEPA-grade filters for fine dust control.

B. VOC Emission Control Solution

• Water-Based Paint/PU Paint Dry Spray Booth
  • Utilizes dry filtration (e.g., activated carbon or filter pads) to trap paint mist and VOCs.
  • Compatible with eco-friendly water-based paints to further reduce VOC emissions.

3. Expected Performance

• Dust Concentration: ≤5 mg/m³ (meeting occupational health standards).
• VOC Removal Rate: ≥90% (efficient reduction of hazardous gases).

4. Implementation Benefits

• Compliance: Aligns with environmental and workplace safety regulations.
• Efficiency: Automated systems minimize manual cleaning and maintenance.
• Sustainability: Reduced waste and improved air quality.